+86 18963299571
info@millart.cn
SPECIFICATION | CK6136/750MM | |
CAPACITY | Max.swing over bed | 360mm |
Max.swing over carrage | 190mm | |
Center Distance | 750mm | |
Bed Width | 360mm | |
HEADSTOCK | Spindle hole | 48mm |
Spindle nose | ISO-A2-5 | |
Spindle taper | MT5 | |
Spindle speed steps | Variable | |
Spindle speed | 200-2500rpm | |
Headstock choice advice | high speed finsh turning | |
CARRIAGE | X/Z axis rapid travel speed | 5000/6000mm/min |
Max.travel of X/Z axis | 220/1000mm | |
Number of tool post | 4 position electrical | |
Max.size of toolshank | 20*20mm2 | |
ACCURACY | Positioning accuracy | 0.01mm |
Repeat positioning accuracy | 0.005mm | |
The smallest unit | 0.001mm | |
TAILSTOCK | Dia.of tailstock sleeve | 65mm |
Taper of tailstock sleeve | MT4 | |
Max.travel of tailstock | 140mm | |
MOTOR | Main drive motor | 5.5KW |
Coolant pump motor | 120W | |
PACKING(L*W*H) | 200*155*195cm | |
N.W/G.W | 1400/1650kgs | |
Standard accessories:
| Siemens 808D control system |
| 3-jaw chuck(Φ200mm) |
| 4-station electrical toolpost |
| Work lamp |
| Coolant system |
| Dead centre(MT4) |
| Centre sleeve(MT4/6) |
| Oil gun |
| Tool box |
| Operation manual |
