Specifications | UNIT | CS6250B | |
Capacity | Max.swing dia. over bed | mm | Φ500 |
Max.swing dia.in gap | mm | Φ710 | |
Max.swing dia. over slides | mm | Φ300 | |
Max. workpiece length | mm | 1000/1500/2000/3000 | |
Bed width | mm | 400 | |
Spindle | Spindle bore diameter | mm | Φ82 |
Type of spindle nose | no | ISO702/II NO.8 com-lock type | |
Spindle speed | rpm | 24 steps 9-1600 | |
Spindle motor power | KW | 7.5 | |
Tailstock | Diameter of quill | mm | 75 |
Max. travel of quill | mm | 150 | |
Taper of quill (Morse) | MT | 5 | |
Turret | Tool O.D. size | mm | 25x25 |
Feed | Max. X travel | mm | 145 |
Max. Z travel | mm | 320 | |
X feed range | mm/r | 93 kinds 0.028-6.43 | |
Z feed range | mm/r | 93 kinds 0.012-2.73 | |
Metric threads | mm | 48 kinds 0.5-224 | |
Inch threads | t.p.i | 48 kinds 72-1/4 | |
Module threads | πmm | 42 kinds 0.5-112 | |
Diametricpitch threads | t.p.i.π | 42 kinds 56-1/4 |
Standard accessories:
3-jaw chuck |
4-jaw chuck |
Steady rest |
Follow rest |
Face plate |
Drive plate |
Dead centers |
Center sleeve |
Full splash guard |
Work lamp |
Coolant system |
Lubricating system |
Oil tray |
Foot brake |
Foundation blocks |
Tool and tool box |
Optional accessories:
2 axis DRO |
3 axis DRO |
Chuck guard |
Tool post guard |
Leadscrew cover |
Live centers |
Tapper turning attachment |
Thread chasing dial |
Logitudinal micro stop |
Schneider electrical component |
Quick change tool post |